Twin and Triple Ring LED Ceiling Light

Two or three slim rings, overlapping at slightly different heights, so the fitting has some depth to it without hanging down into the room. Lit, each ring reads as a separate line of light, which gives a plain ceiling far more interest than a single disc ever manages. Unlit, the iron frame and acrylic diffusers keep it looking like a considered piece rather than a light fitting waiting to be noticed.

The two-ring version measures thirty-four centimetres and draws twenty watts, which suits a bedroom, a study or a dining nook. The three-ring steps up to fifty-two centimetres and thirty watts, covering ten to twenty square metres, enough for a living room or a good-sized landing. Both keep a shallow seven centimetre profile at the ceiling plate, so they work in rooms where a hanging fitting would be an obstacle.

Warm and cold white are offered as separate options rather than switchable, so choose warm for living and sleeping rooms and cold where the light needs to be practical. The LED is integrated and runs on 220 to 240 volt mains, and the fitting carries an IP20 rating, meaning dry indoor locations only. Installation is hardwired and should be carried out by a qualified electrician.

• Iron frame with acrylic diffusers in overlapping ring arrangement
• Two rings: approximately 34cm, 20W. Three rings: approximately 52cm, 30W
• Integrated LED, 220-240V; choice of warm white or cold white
• IP20 rated - dry indoor locations only
• Covers approximately 10 to 20 square metres
• Installation by a qualified electrician; isolate the circuit at the consumer unit and check for pipes and cables before drilling.
• Fit only to a ceiling point rated for the weight of the fixture.