Twin Head Resin Wall Light

A wall light with two small rounded shades set one above the other on a single metal backplate, 12cm across and 23cm tall overall. Splitting the output across two heads gives a gentler, more even wash than one larger shade, and because each shade is cast in resin the colour is solid rather than a coating that can chip off an edge.

Eight combinations are offered, from single colours in white, black, red, pink and green through to two-tone pairings such as green and pink or white and black. Pairing two colours makes it an easy way to bring an accent into an otherwise plain hallway. It takes two standard screw-fit bulbs, which are not supplied, and runs on a wide 90-260V AC input, covering a coverage area of roughly three to five square metres.

A short 0.3m tail is provided for connection. It suits a hallway, a stair wall, or the space beside a bed where a table lamp would otherwise take up the whole of a small bedside surface. Dust the resin with a dry cloth once the fitting has cooled. This is a hardwired fitting and should be installed by a qualified electrician on a circuit isolated at the consumer unit.

• Cast resin shades on a metal backplate; 12cm diameter x 23cm high
• Takes two standard screw-fit (E27) bulbs - bulbs not supplied
• 90-260V AC input; 0.3m connection tail
• Covers roughly 3-5 square metres
• Installation by a qualified electrician; isolate the circuit at the consumer unit and check for pipes and cables before drilling
• Eight single and two-tone colour combinations